How To Add Rig Pic To The Signature?
Posted 02 May 2013 - 10:30 PM
2008 GMC Sierra Crew 5.3 Liter with 3.73 rear.
3500 remote start Champion generator.
Posted 03 May 2013 - 11:25 AM
1. To start with, you need a photo saved in .jpg format. It should be aLandscape orientation (wider than tall), and can be no larger than 385x100pixels, and should be saved at a resolution that makes a file size no biggerthan about 30K.
2. Now you need to save the picture to an accessible website. The easiest is todo that here. Start by going to the 'My Controls' link in the upper right ofthe screen. Then, in the Menu on the left side, click 'Your Albums'. You shouldfind a 'Create Album' button. Clicking on this, will lead you through settingup an album. Once you have done that, look at the drop down menu on the right(under 'Controls') and you will see an option to 'Upload Image'. This willallow you to browse through your computer, and select the image to want to use.You must give the image a caption, and click 'Post Image' when you are done.
3. With me so far? Good.. The hard part is done! Now you need to grab the URLaddress to the picture you posted. To do this, click 'View' under that samedrop down menu. All of the pictures you have stored in the album will now bevisible (in your case, probably only one at this point). Click on the thumbnailfor that picture to see the full size version. Once the full size imagedisplays, right-click on the image and select 'Properties' from the pop upwindow. In the 'Properties' window, you will see the URL address for the image.Highlight the entire address (http:.......... .jpg) and copy. Close theProperties window, and go back to the 'My Controls' link.
4. Back to the Menu on the left side of the screen, look under 'PersonalProfile', and click 'Edit Signature'. A window will open up that allows you to placetext and images in your signature. This information will appear a the bottom ofevery post you make, so in consideration of the other members, you should beconcise and efficient with what you enter here. To place the image, click theimage button (looks like a photo of a tree) above the text entry area, andpaste the URL address that you copied into the prompt window that pops up.Click 'OK' in the prompt window, and then 'Update my Signature' below the textentry field, and you are done!
Pre-Delivery Inspection (PDI) is now on our Blog Page - RV With The Tanners
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users