Soft Floor - Problems, Solutions & After Market - Outback RV Owners Forum

Jump to content


Photo

Soft Floor


  • Please log in to reply
No replies to this topic

#1 MJV

MJV

    Advanced Member

  • Legacy Member
  • PipPipPip
  • 263 posts
  • Location:Saskatoon Sask.
  • Outback/SOB:2011 Outback 210 RS
  • Tow Vehicle:2008 GMC Sierra--Z71 4x4

Posted 28 July 2020 - 11:22 AM

I have been away from the forum for a while.    So i apologize if this topic may have discussed in years past.  I have a 2011 Outback 210 RS Anniversary edition  The floor in the heavy traffic area by the kitchen sink , refrigerator, pantry area ,has soft spots.  This is compounded that Keystone , in their wisdom, cut in the three floor registers there.  This is a fatigue problem, and NOT a moisture issue. If one places weight alongside the edge of the registers a noticeable "give" can be noticed.  I pulled out one register, and the duct work it sits in , and i see the floor is constructed of bonded "Styrofoam" material process.  REALLY !!     So other than removing the underbelly, and somehow gluing/screwing , some sort of reinforcing material how does one repair this?  or do i just enjoy the "spring" in my step and live with it ?






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users